Part 1 of this project diary can be found here
Part 3 of this project diary can be found here
I’ve still not decided whether to have fixed or floating mechanism but it was pointless doing 2 images. The basics would be the same if I go for the floating option “Plan A”, the holes would just be up along the part of the cover that will form the spine.
Some bling has arrived. I saw these green diamante rivets when I was looking for some plain ones. If I don’t get to use them on this project, I’m sure there’s plenty of other things screaming out for some 🙂
June 9th update : I’ve gone with “Plan A” and I’ve recycled the hard plastic cover of an old notebook to make the part that the ring mechanism will attach to and slide into a slot in the inner cover. At this point, I’ve also decided against using ties to hold it closed and will use a popper stud/snap tab instead. These are on order from China.
At the time of writing, all of the required components are here except for the popper studs and the metal corners. Time to crack on. Next job is to figure out the inner cover layout and put it all together. As this is faux leather I’m sure my sewing machine will cope with it.